메뉴 바로가기
주메뉴 바로가기
컨텐츠 바로가기

Frame Grabber

  • Home
  • Products
  • Frame Grabber
NT-CL

NT-CL is a frame grabber for camera links supporting PCI-Express interface.
It supports Base / Medium / Full Mode.
It is possible to transfer the data input from cameras to system memory / display memory in real time with NT-CL.

■ Standard SDR-26 Pin Connector x 2EA
■ Supports Base Mode
- Supports 1/2/3 tap camera interface
- Supports RGB camera interface
■ Supports Medium, Full Mode
- Supports 1/2/3/4/8/10 tap camera interface
- Supports RGB camera interface
■ Supports 8/10/12/14/16/24-bit Camera Input
■ Supports Line Scan & Area Scan Camera

NT-BCL4

NT-BCL4 is a frame grabber for camera links supporting PCI-Express interface.
It supports Quad-Base Mode.
It is possible to transfer the data input from cameras to system memory / display memory in real time with NT-BCL4.

■ Standard SDR-26 Pin Connector x 4EA
■ Supports Base Mode
- Supports 1/2/3 tap camera interface
- Supports RGB camera interface
■ Supports 8/10/12/14/16/24-bit Camera Input
■ Supports Line Scan & Area Scan Camera

NT-PoE4401

NT-PoE4401 is a PCIe x4 POE 4-port NIC based on the Intel I350 chipset and is compatible with x8 and x16 lanes.
PoE NICs are designed for general servers, such as industrial field vision inspection servers and equipment, vision field clients, and fast
Ethernet data transmission equipment.

NT-PoE4201

NT-PoE4201 is a PCIe x4 POE 2-port NIC based on the Intel I350 chipset and is compatible with x8 and x16 lanes.
PoE NICs are designed for general servers, such as industrial field vision inspection servers and equipment, vision field clients, and fast
Ethernet data transmission equipment.

NT-A4

NT-A4 is a frame grabber for analog cameras supporting PCI-Express interface.
It is possible to capture four cameras at the same time, and four channels can be captured independently in trigger mode.
It is possible to transfer image data input from four B/W cameras to system memory / display memory in real time.

Nexus-CXP

Nexus-CXP is a frame grabber for CoaXPress supporting PCI-Express interface.
Up to four CXP-6 cameras can be connected and it is possible to control various cameras.
It is possible to transfer the data input from cameras to system memory / display memory in real time with Nexus-CXP.

■ Uses standard coaxial cable
■ Supports up to four ROIs per channel
■ Camera data transfer amount (when using CXP-6)
- Up to 2.5GB / sec

Nexus-CL

Nexus-CL is a frame grabber for camera links supporting PCI-Express interface.
It supports Dual-Base / Medium / Full Mode, and up to 4 ROI areas per channel can be specified.
It is possible to transfer the data input from cameras to system memory / display memory in real time with Nexus-CL.

■ Standard MDR-26 Pin Connector x 2EA
■ Supports Dual-Base Mode
- Supports 1/2/3 tap camera interface
- Supports RGB camera interface
■ Supports Medium, Full Mode
- Supports 1/2/3/4/8/10 tap camera interface
- Supports RGB camera interface
■ Supports 8/10/12/14/16/24-bit Camera Input
■ Supports Line Scan & Area Scan Camera

Nexus-PoE

NT-PoE4201 is a PCIe x4 POE 2-port NIC based on the Intel I350 chipset and is compatible with x8 and x16 lanes.
PoE NICs are designed for general servers, such as industrial field vision inspection servers and equipment, vision field clients, and fast Ethernet data transmission equipment.

Nexus-USB

Nexus-USB is a frame grabber for USB 3.1 cameras supporting PCI-Express interface.
Up to four USB cameras can be connected.
It is possible to transfer the data input from cameras to system memory / display memory in real time with Nexus-USB.

■ Uses standard USB 3.1 cable
■ Transfers up to 10 Gbps of data per channel
■ Uses 4-pin auxiliary power supply

Navis-MCL

Navis-MCL is a frame grabber for camera links supporting PCI-Express interface.
It supports Dual-Base / Medium Mode, and up to 4 ROI areas per channel can be specified.
It is possible to transfer image data input from cameras to system memory / display memory in real time with Navis-MCL.

Navis-CL

Navis-CL is a frame grabber for camera links supporting PCI-Express interface.
It supports Base Mode, and up to 4 ROI areas can be specified.
It is possible to transfer the data input from cameras to system memory / display memory in real time with Navis-CL.

Navis-A4

Navis-A4 is a frame grabber for analog cameras supporting PCI-Express interface.
It is possible to capture four cameras at the same time, and four channels can be captured independently in trigger mode.
It is possible to transfer image data input from four B/W cameras to system memory / display memory in real time.

BlueEye-A4

BlueEye-A4 is a frame grabber for analog cameras supporting PCI interface.
It is possible to capture four cameras at the same time, and four channels can be captured independently in trigger mode.
It is possible to transfer image data input from four B/W cameras to system memory / display memory in real time.

NT-A8

NT-A8 is a frame grabber for analog cameras supporting Compact PCI-Express interface.
It is possible to capture eight cameras at the same time.
It is possible to transfer image data input from eight B/W cameras to system memory / display memory in real time.

SME-MC4

SME-MC4 is a frame grabber for analog cameras supporting Compact PCI-Express interface.
It is possible to capture four cameras at the same time, and four channels can be captured independently in trigger mode.
It is possible to transfer image data input from four B/W cameras to system memory / display memory in real time.